Pressure-type color steel tile

Contour colored plate makes use of color coated steel, by rolling and bending into a variety of wave-type pressured plate, which is applies to industrial and civil buildings, warehouses, special construction, the roof of large span steel structure housing, walls and interior and exterior decoration. It has light weight, high strength, rich colors, earthquake proof, fireproof, rainproofand and long life. In addition, it can be used easily. maintenance-free has been widely used. Or cold-rolled steel sheet by cold forming of steel. Organic coated steel sheet (or color steel), galvanized sheet steel, anti-corrosion sheet steel (including asbestos asphalt layer) or other thin steel plate and so on. Pressure plate has a flat, light weight, high strength, good seismic performance, construction, fast, beautiful shape, etc., it is good building material and components, mainly for the building envelope, floor, can also be used for other structures.

Depending on the use of functional requirements, contour plate can be pressed into a wave, hyperbolic wave, rib-shaped, V-shaped, reinforced type. Commonly used for roofing and wall thickness of 0.4 to 1.6 mm for load-bearing floor or when the thickness of the silo 2 to 3 mm or more. Wave height is generally 10 to 200 mm. When not stiffening, its high-thickness ratio should be controlled at 200 or less. When using a long pass roof, the slope can be 2 to 5%, the deflection does not exceed l/300 (l for the calculation of span).
Thin pressure plate due to the original panel, anti-corrosion coating directly affects the quality of life, in order to meet the requirements of processing and rust-proof, coated steel basis having the relevant provisions of the inspection. Thin steel plate under normal circumstances the requirement can also be based, the pressure-type anti-rust paint and then painted, or stainless steel sheet of the original board. Pressure plate used for industrial plant roof, siding, in the general case of no insulation requirements, per square meter of steel about 5 to 11 kg. A thermal insulation requirements, the available mineral wool board, glass wool, foam and other materials for insulation. Combination of pressure plate made of composite slabs and concrete, can save the template can be used as load-bearing structure of wood. At the same time to strengthen the plate with the concrete binding, should be pre-welded on the plate or the suppression of two-way stud stiffeners.